Go-E Wallbox

Max Current

The maximum current in Amperes that the Wallbox is allowed to draw per phase.

Min Current

The minimum current in Amperes that the Wallbox is allowed to draw per phase.

Phase Switch Power

The power in Watts at which the Wallbox will switch from single-phase to three-phase charging.

Max Power

The maximum power in Watts that the Wallbox is allowed to draw from the grid.

Energy Meter

The Energy Meter Device that is connected to the Wallbox.

Read Power After Set

If enabled, the Wallbox will read back the actual power after setting it. This can be used to verify that the set operation was successful.

Min Phase Switch Time

The minimum time in seconds between phase switches. This is to prevent rapid switching between single-phase and three-phase charging.

Min Phase Count

The minimum number of phases that must be available for the Wallbox to charge. If the number of available phases is below this value, the Wallbox will not charge.

Scheme

The HTTP scheme to use when connecting to the Wallbox. Either "http" or "https".

Host

The IP address or hostname of the Go-E Wallbox device.

Port

The port on which the Go-E Wallbox device is reachable.

Verify SSL

Whether to verify the SSL certificate when connecting to the Wallbox over HTTPS. Disable this only if you are using a self-signed certificate.

Timeout

The timeout in seconds for communication with the Go-E Wallbox device.